Guntermann-drunck DL-MUX4 User Manual download pdf (Page 64)

Configuration

20 · G&D DL-MUX4

Changing the select key sets

The select keys 1 to 4 (set »1…4«) are activated in the default settings to switch

between the computers that are connected to the KVM switch.

If one of the key combinations of the select key set interferes with a key combination

of an installed application program, the hotkey

(see page 19) and the select key set

can be changed.

How to change the select key set:

EXAMPLE:

Press Hotkey+2 (default: Ctrl+2) to switch to computer 2.

Setup mode

1. Press Hotkey+Backspace (default: Ctrl+Backspace) to activate the setup mode.

If the hotkey delay is activated, press the key combination during the adjusted time

(default: 7 seconds).

2. Press one of the following setup keys to activate a particular select key set.

1  activate select key sets 1, 2, 3, 4

Num1  activate select key sets Num1, Num2, Num3, Num4

Y  activate select key sets A, B, C, D

F1  activate select key sets F1, F2, F3, F4

Config Panel

1. Use the tree view to click on KVM switches > [All switches].

2. Right-click the KVM switch and click on the Configuration entry in the con-

text menu.

3. Click the General tab.

4. Use the Select Key field of the Configuration paragraph to select one of the fol-

lowing options:

1…4  activate select key sets 1, 2, 3, 4

Num1…4  activate select key sets Num1, Num2, Num3, Num4

A…D  activate select key sets A, B, C, D

F1…F4  activate select key sets F1, F2, F3, F4

5. Click OK to save your changes.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

No comments

Guntermann-drunck DL-MUX4 User Manual Page 64