Guntermann-drunck DL-MUX4 User Manual download pdf (Page 47)

Installation

G&D DL-MUX4 · 3

English

Installation

Connect the cables preferably block by block and from the bottom up. By doing so,

you will avoid already connected cables blocking your view of the interfaces.

Overview of the interfaces

Front panel of the KVM switch

The front panel of the KVM switch provides two USB 2.0 interfaces to connect any

USB devices. USB devices such as a printer or a mass storage device connected to

the interfaces are available to the active computer.

The front panel also provides a Service socket. This interface is not relevant for oper-

ating the device.

Next to the interfaces, four buttons enable you to select the active channel. The front

panel also provides several LEDs

(see Status displays on page 7) .

Back panel of the KVM switch

The back panel of the KVM switch provides interfaces to connect the console devices

and the computers. The following page contains a detailed description of these inter

faces.

Setting up the device

1. Ensure that the computers, which are to be connected to the KVM switch, are

turned off. If the computers are provided with both keyboards and mouses,

unplug the cables of the input devices from the PS/2 or USB interfaces.

2. Place the KVM switch between the computers and the console. Please mind the

maximum cable length of five metres between the KVM switch and the computers

which are to be connected.

3. Before installing the KVM switch, decide which button on the front panel of the

device should be assigned to which computer.

Figure 1: Detailed front view of the KVM switch

Active

Status

Service

USB 2.0

Main

Power

Red.

Status

Switch

Ready

Ident.

CPU 1 CPU 2

CPU 3 CPU 4

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 83 84

Comments to this Manuals

No comments

Guntermann-drunck DL-MUX4 User Manual Page 47

Comments to this Manuals

Related products and manuals for Equipment Guntermann-drunck DL-MUX4