Guntermann-drunck DL-MUX4 User Manual download pdf (Page 72)

Configuration

28 · G&D DL-MUX4

How to adjust the transfer speed of USB K/M signals:

Enabling/disabling the keyboard signal

By default, the signals of mouse and keyboard connected to the workstation are

transmitted to the computer of the active channel.

The settings of the KVM switch let you enable or disable the transmisison of the

keyboard signal for each channel.

How to enable/disable the transmission of a channel‘s keyboard signal:

Config Panel

1. Use the tree view to click on KVM switches > [All switches].

2. Right-click the KVM switch and click on the Configuration entry in the

context menu.

3. Click the Channels tab.

4. Under USB data transfer speed, select the option you want to apply for your

channel:

Full Speed  Signals of USB mouse and USB keyboard are transmitted

in full speed mode to the computer.

Low Speed  Signals of USB mouse and USB keyboard are transmitted

in low speed mode to the computer.

5. Click OK to save your changes.

Config Panel

1. Use the tree view to click on KVM switches > [All switches].

2. Right-click the KVM switch and click on the Configuration entry in the

context menu.

3. Click the Channels tab.

4. Under Keyboard of the desired channel, select one of the following options:

Enabled  Keyboard signals are transmitted to the computer

of this channel (default).

Disabled  Keyboard signals are not transmitted to the computer

of this channel.

5. Click OK to save your changes.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 83 84

No comments

Guntermann-drunck DL-MUX4 User Manual Page 72